Worldwide 
Add products to basket to see delivery charges
FREE UK DeliverySeal Guard Porcelain & Stone Impregnating Sealer (Tilers Choice) 1lt
Seal-Guard Impregnator for Porcelain & Stone is a superior, low odour impregnator to help prevent oil and water-based staining on all tile and masonry surfaces. This product was specifically formulated for use on porcelain, but is excellent on granite, marble, sandstone, pavers, and terra cotta. For both interior and exterior use.
- 1 Litre Tin.
- Low Odour.
- Slower Drying; easy to work with.
- Helps prevent permanent staining.
- Resists UV degradation.
- Allows treated surface to breathe.
- Installation:
- Use straight from the tin.
- Test in obscure area to determine suitability for the intended use.
- Surface should be clean, dry, and free from any waxes, coatings, finishes or grouting materials.
- Protect any painted or stained surface adjacent to application area.
- Apply to surface in a thin, even coat with a pump or airless sprayer, brush, rag, mop or roller.
- One coat is normally sufficient, but a second application is recommended on more porous surfaces, i.e. terra cotta and sandstone, or heavy walkway areas to ensure complete protection.
- Allow twenty minutes between coats.
- Drying and curing time on a treated surface is approximately 2 l/2 hours, but for optimum results, the treated area should be kept dry and free from soils for at least 24 hours.
- Note: On highly polished surfaces, such as porcelain, marble or granite, two coats are recommended.
- On small areas, buff off before the second coat is dry.
- For larger areas, let it dry and cure for 24 hours.
- If necessary, any excess can be easily removed with a damp cloth or buff off.
Do Not Use Below 6° C
