25 Litre Capacity
Features a measuring guide
For accurate measuring of adhesives, grouts and levelling compounds
Walkable in 6 hours
10kg
Coverage: 10kg approx. 18m²
20kg Bag & 4.85kg Bottle
Coverage: Approximately 5m² at 3mm thick per unit
Unaffected by moisture
Install floorcoverings after 4 hours
Suitable for use on floors with underfloor heating
40 x 20kg Bag & 4.85kg Bottle
25kg Bag
Coverage: approx. 6m2 at 3mm thickness per 25kg
Min Depth: 3mm
Max Depth: 40mm
Tile After: 4-6 Hours
40 x 25kg Bag
UltraFloor Prime IT Multi-surface Primer is a moisture tolerant, water based acrylic primer, sealer and bonding aid, suitable for porous and non-porous substrates. Prime IT Multi-surface Primer has been designed to promote the adhesion of UltraFloor smoothing underlayments.
Special fast-drying hydraulic binder for producing bonded, unbonded or floating screeds, including those with piped underfloor heating.
For interior and exterior use.
Ceramic/porcelain tiles can be installed after 24 hours with natural stone installation possible after 2 days.
Requires the addition of aggregates and water.
Full Pallet 48 x 20kg bags
Fibre-modified hydraulic cement binder ideal for producing floating, bond, or unbonded screeds.
Fast Drying
Foot traffic from 12 hours
Ready to receive floor coverings from 24 hours
Approved for use with 0/4mm aggregate
Suitable for Internal and External applications
48 x 20kg bags
Rapid Set (Walkable after 2 hours)
22kg
Coverage: 4m² at 3mm thick
Rapid Set
11kg Bag (Also available in 5kg bags)
Excellent Coverage (10m² @ 1mm thickness.)
No Priming Required.
5kg Bag (Also available in 11kg bags)
Excellent Coverage
No Priming Required
Coverage:
3m² per 25 kg bag @ 5mm depth
1m² per 25kg bag @ 15mm depth
0.75m² per 25kg bag @ 20mm depth
0.3m² per 25kg bag @50mm depth
Min depth: 5mm
Max depth: 50mm
Foot traffic: 3 Hours
Internal use
11kg
Coverage: Approximately 7m2 at 1mm thick per 11kg unit
48 x 25kg Bags
3m² per 25kg bag @ 5mm depth
0.3m² per 25kg bag @ 50mm depth
Min Depth: 5mm
Max Depth: 50mm
Foot traffic: 3 hours
Extremely strong- withstands heavy wheeled traffic and has excellent abrasion resistance
Durable- produces wearing surfaces in commercial and industrial areas
Can be pumped applied for speed application
3.1m² per 25kg bag @ 5mm depth
1.5m² per 25kg bag @ 10mm depth
1.0m² per 25kg bag @ 15mm depth
Max Depth: 15mm
Internal Use
5kg Tub
22m² per 5kg tub @ Feather Edge/Scratch Coat
6m² per 5kg tub @ 1mm depth
Min Depth: Feather Edge
Max Depth: 3mm
Foot traffic: 30 mins
Colour: Grey
Very Low Emission
3 - 10mm In A Single Application
Shrinkage & Cracking Resistant
Interior Use Only
Coverage: 4.5m² at 3mm
20kg Bag
100 x 5kg Tubs
20kg Full Pallet (48 Bag Tail Lift)
10kg Tub
1m² per 10kg tub @ 6.5mm depth
3.2m² per 10kg tub @ 2mm depth
bulked out with graded aggregate at a ratio of 1:1 by volume will cover approx. 1m² per 10kg tub @ 10mm depth
Min Depth: 1mm
Max Depth: 20mm
Foot traffic: 30 minutes
Specifically formulated for Porcelain and Natural Stone
Provides exceptional bond and durability
Simply mix with water
Quick and easy roller brush application
Enhances lifetime performance of paved areas
Part of the ProPave External Tiling System
Size: 17kg bucket
56 x 10kg Tubs
52 Bucket Pallet
Size: 17kg buckets
5L Bottle
16.5m² per 5l bottle @ two-coats
Removes the need to prime
Up to 95% RH protection
1 Litre or 5 Litre Bottle
5 Litre applied neat = approx. 25m²
1 Part P 51 diluted: ½ part water = 25m²
1 Part P 51 diluted: 1 part water = 33m²
1 Part P 51 diluted: 2 parts water = 60m²
1 Part P 51 diluted: 3 parts water = 100m²
1 Part P 51 diluted: 5 parts water = 160m²
Available in 5kg & 10kg tubs
Up to 15m² per 5kg tub on Powder Floated Concrete
Up to 12m² per 5kg tub on Cementitious Screed
Up to 9m² per 5kg tub on Cementitious Screeds with commissioned warm water underfloor heating
Cure Time: 5 Hours
Tilemaster FAST One Coat DPM is a two component, solvent free, one coat epoxy Damp Proof Membrane.
Tilemaster FAST One Coat DPM is suitable for use on a wide range of substrates including concrete, sand/cement screeds, anhydrite and calcium sulphate screeds.
INTERNAL & EXTERNAL USE (Unaffected by frost after curing)
20kg Bag & 5kg Bottle
Coverage: 20kg bag and 5 L liquid will cover approximately 5 sq. metres at 3mm depth
Min Depth: 2mm
Max Depth: 12mm
Tile After: 12 Hours
20kg Bag, 4L Bottle
Moisture tolerant
Foot traffic in as little as 2.5 hours
Ready to receive floor coverings after 8 hours
Use over most common subfloors
UFH compatible
Low odour
Protein free
Excellent flexibility for timber floors and underfloor heating systems
1 Litre Or 5 Litre Bottle
1 litre applied neat = 10m2
1 litre diluted with 3 parts water = 40m2
1 litre applied as a slurry coat = 18m2
Tile After: 30-45 Mins
40x 20kg Bags & 5kg Bottles
Rapid Drying
Blue
5kg will cover 45 - 65m²
48 x 20kg Bags & 48 x 4L Bottles
5kg Will Cover 65m2 per 5kg unit
20kg Bag & 5.0Ltr Liquid unit
Tile After: 4 Hours
Coverage: 20kg bag and 5.0Ltr liquid unit will cover 5.0m2 at 3mm thickness
Ideal for rapid applications over almost all substrates without the need to prime.
5.0m² per 20kg bag @ 3mm depth
3.0m² per 20kg bag @ 5mm depth
1.0m² per 20kg bag @ 15mm depth
Working Time: 10-15 Minutes
Tile after: 90 Minutes
40x 20kg Bag & 5.0Ltr Liquid unit
48 x 20kg Bags & 48 x 4.6L Bottles
20kg Bag & 4L Bottle
Coverage: Approx 6m² at 2mm
Tile After: 45 Mins
48x 20kg Bags & 4L Bottles
Coverage: 20kg pack will cover approximately 4.2 sq metres at 3mm depth when mixed with 5 litres of water
Tile After: 24 Hours
Ideal for screwed and fixed plywood floors where vibration and movement is likely
Use as a finished wear surface
Ready to receive resin finishes after 24 hours
6.5m² per 20kg bag @ 2mm
2.6m² per 20kg bag @ 5mm
1.3m² per 20kg bag @ 10mm
Max Depth: 10mm
Floor coverings after: 1 Hour
48 x 20kg Bags
11kg Bag
Coverage: 50m² per 11kg bag
Tile After: 15 Mins
Coverage: Approx. 4.3m² /pack @ 3mm
Max Depth: 40mm (In one application)
40x 11kg Bags
48x 20kg Bags
80x 11kg Bags
Fine Flow Smoothing Underlayment for Sheet Vinyl, LVT, Linoleum and Rubber
UltraFloor recommends that subfloors should be primed with Ultra Floor Prime It MSP prior to the application of UltraFloor Level IT Smooth.
6.6m² per 20kg bag @ 2mm depth
2.2m² per 20kg bag @ 6mm depth
1.1m² per 20kg bag @ 12mm depth
0.44m² per 20kg bag @ 30mm depth
Max Depth: 30mm
Foot traffic after 2-3 hours
Recieve floor coverings after 12 hours
Coverage: 20kg will cover 4.2m² at 3mm thickness
Tile After:45-60 Mins
Coverage: 20kg will cover 4.2m2 at 3mm thickness
20kg Bag + 4.5ltr Bottle
Coverage: 20kg bag and 4.5Ltr liquid unit will cover 4.5m² at 3mm thickness
Tile After: 45-60 Mins
40x 20kg Bag + 4.5ltr Bottle
This Tilemaster Hygrometer is used to read the moisture levels in pre-existing floor.
The Hygrometer will tell you if the screed is suitable and ready to receive floor coverings.
We use cookies to provide you with a better website experience. Close this popup to carry on browsing, or click here to find out more about cookies