Pro Tiler Tools
FREE UK Delivery On orders over £250net*
Need some help? Call us on 01604 859800
Finance Available On orders over £250*

Ardex ARDITEX CL PLUS+ Fibre Reinforced Moisture Tolerant Levelling & Smoothing Compound 20kg

by Ardex

Brand Ardex

A Fibre Reinforced Levelling & Smoothing Compound

Outstanding Flow, Adhesion And Moisture Resistant Properties

Suitable For Use Under Damp Proof Membranes

Walkable In As Little As 2 Hours

For Internal Use

Size: 20kg Powder & 4.8kg Latex

Coverage: Approximately 4m² @ 3mm Thick Per Unit

Product Code Price Quantity
44882

£30.60 INC VAT

£25.50 EX VAT

Work out how much you need

Using the calculator below, you can work out how much material you will need to get the job done. Please either enter your required area m2 or the width and length.

This is a rough guide calculation provided in good faith, actual usage may vary, please allow for wastage when placing your order. Pro Tiler Tools Ltd can't be held responsible for any under ordering.

Description

ARDITEX CL PLUS+ is a fibre-reinforced levelling and smoothing compound with outstanding flow, adhesion, and moisture-resistant properties. ARDITEX CL PLUS+ is walkable in as little as 2 hours and most floorcoverings can be installed after as little as 8 hours.

For levelling and smoothing the most common internal subfloors such as concrete, cement/sand gypsum (anhydrite) screeds, flooring grade plywood, ceramic tiles and flooring grade asphalt. ARDITEX CL PLUS+ can be laid from a feathered edge up to 10mm in a single application or up to 30mm by incorporating ARDEX Coarse Aggregate. NOTE: ARDITEX CL PLUS+ should not be used on top of rubber, linoleum, cork or moisture-sensitive floorcoverings.

- Apply directly to most substrates without priming, including old adhesive residues and bitumen, ARDEX Damp Proof Membranes and ceramic tiles.
- Unaffected by moisture and can be used directly to damp concrete.
- Walk on after 2 hours and install floorcoverings in as little as 8 hours.
- Can be used on heated screeds.

Specification

Bulk Density Of Powder: approx. 1.9kg/litre.
Compressive Strength: After 28 days Greater than 16 N/mm².
Flexural Strength: After 28 days Greater than 7 N/mm².
ARDITEX CL PLUS+: Cementitious screed material for use internally in buildings.
Thicknesses: The standard mix is suitable for applications from a feather edge up to 10mm, however for thicknesses above 10mm the incorporation of up to an equal volume of ARDEX Coarse Aggregate will prove economic.
Storage & Shelf Life: ARDITEX CL PLUS+ powder has a storage life of not less than 12 months if stored in dry conditions. ARDITEX CL PLUS+ latex has a storage life of 6 months in a sealed container if stored in frost-free conditions, out of direct sunlight.