by Ardex
Rapid Set
Withstands Heavy Wheeled Traffic
Pumpable
Depth: 5 to 10mm Thickness
Bag Size: 25kg
Coverage: 3m² @ 5mm Thick Per 25kg Bag
| Product Code | Price | Quantity |
|---|---|---|
| 18284 |
£60.70 INC VAT £50.58 EX VAT |
|
ARDEX K80 is a specially formulated cement-based compound for resurfacing and levelling existing concrete floors to give a hard, smooth, flat, wearing surface or as a base for suitable paint and resin coatings.
ARDEX K80 Industrial Floor System provides the ideal combination of toughness, low maintenance, ease of application and high durability coupled with the incorporation of the unique ARDEX ‘Rapidry Formula’. Due to the ‘Rapidry Formula’ chemically binding the mixed water, the ARDEX K80 literally dries within itself at the same time as it rapidly develops strength. When mixed with water, ARDEX K80 produces a fluid self-levelling mortar which can be applied by trowel or pump as a floor finish from 5mm-10mm.
ARDEX K80 Industrial Floor System is virtually tension free and provides a very high-strength surface which has enough resiliency to accept heavy wheeled traffic, such as that found in industrial factories, workshops and warehouses, etc. Independent testing at Aston University has confirmed the excellent inherent abrasion resistance of ARDEX K80 Industrial Floor System ensuring its suitability for a wide range of applications.
Features:
- Cost Effective: Base mix and topping system available.
- Strong: Withstands heavy wheeled traffic and has excellent abrasion resistance.
- Durable: Produces wearing surfaces in commercial and industrial areas.
- Versatile: Can receive a range of surface finishes including suitable resin coatings, tiles and natural stone.
- Rapidry Formula.
- Fast: Install in the evening and re-open for business the next day.
- Can be installed from 5mm to 10mm over existing concrete surfaces.
- Pumpable.
Abrasion Resistance: The abrasion resistance of ARDEX K 80, when measured in accordance with BS 8204, was rated as at least AR1.
Resistance to chair castors: Yes.
Suitable for underfloor heating: Yes.
Bulk density: Approx. 1.3kg/litre.
Weight of fresh mortar: Approx. 2.0kg/litre.
Walkability at 20°C: After approx. 2 hours.
Ready to receive floorings and coatings under good conditions at 20°C: After 1 day up to 10mm.
Working time at 20°C: Approximately 30 minutes.
Depth: 5 to 10mm Thickness.
Bag Size: 25kg.
Coverage: 3m² @ 5mm Thick Per 25kg bag.
Compressive Strength
~ 1 day, 14 N/mm².
~ 7 days, 20 N/mm².
~ 28 days, 32 N/mm².
Flexural Strength in accordance with EN 196
~ 1 day, 3.8 N/mm².
~ 7 days, 5.8 N/mm².
~ 28 days, 9.0 N/mm².
Ball Pressure Hardness
~ 1 day 60 N/mm².
~ 7 days 65 N/mm².
~ 28 days 90 N/mm².
Storage: ARDEX K 80 must be stored in unopened packaging, clear of the ground in cool dry conditions and be protected from excessive draught. If stored correctly, as detailed above, the shelf life of these products is 12 months from the date shown on the packaging.
