Pro Tiler Tools
FREE UK Delivery On orders over £250net*
Need some help? Call us on 01604 859800
Finance Available On orders over £250*

Ardex X 77 S Microtec Fibre Reinforced Flexible Rapid Set Adhesive Grey S1 20kg

by Ardex

Brand Ardex

Rapid Set 

Classification: S1 

Colour: Grey

Bag Size: 20kg

Trafficked & Grouted After 90 Minutes

Coverage: 5.5m² @ 3mm Per 20kg

Product Code Price Quantity
18327

£39.59 INC VAT

£32.99 EX VAT

Work out how much you need

Using the calculator below, you can work out how much material you will need to get the job done. Please either enter your required area m2 or the width and length.

This is a rough guide calculation provided in good faith, actual usage may vary, please allow for wastage when placing your order. Pro Tiler Tools Ltd can't be held responsible for any under ordering.

Description

ARDEX X 77 S Grey MICROTEC is a fibre-reinforced, ultra-rapid setting and hardening, cement-based, floor and wall tile adhesives. Specifically formulated to have enhanced properties of adhesion and flexibility, the advanced slump resistance properties make ARDEX X 77 S ideal for fixing large format wall tiles.

ARDEX X 77 S is ideal for fixing ceramic or fully vitrified tiles and other tiles with low porosity, as well as glass and porcelain mosaics, and terrazzo.
ARDEX X 77 S adheres strongly to most construction materials including concrete, cement & sand renders and screeds, heated sub-floors, brickwork and blockwork, gypsum plaster, plasterboard and existing ceramic tiled surfaces.

The BS EN 12004 C2 FTE S1 designation for ARDEX X 77 S, classifies the adhesive as ‘Improved fast setting deformable cementitious adhesive with reduced slip and extended open.' The enhanced setting and hardening performance of ARDEX X 77 S means that after only 24 hours, the adhesive can withstand full loads.

Features: 
- MICROTEC fibre reinforcement for high performance.
- Ultra-rapid setting and hardening – walk on and grout after only 90 minutes.
- Advanced slump resistance, double that of 'T' classified adhesives, ideal for fixing large format wall tiles.
- Ideal for all tile types including porcelain, fully vitrified, mosaics and terrazzo.
- High yield – 5.5m² @ 3mm.
- Rapid strength development allows floors to be put back in use and subject to full loads after 24 hours.
- Ideal for swimming pools and wet areas.
- For internal and external applications.
- Suitable for underfloor heating.

Specification

Weight of fresh mortar: approximately 1.6kg/litre
Working time (20°C): approximately 30 minutes
Pot Life: 30 minutes
Fixing time (20°C): approximately 30 minutes
Adjusting time (20°C): approximately 15 minutes
Tensile Adhesion Strength: Greater than 1 N/mm2
Open Time: approximately 20 minutes
Slip Resistance: Slip, less than 0.5mm 
Tensile Adhesion Strength: At least 0.5 N/mm2 at 6 hours
Transverse Deformation: Classification S1 (Deformation greater than or equal to 2.5mm and less than 5mm)
Colour: Grey
Coverage: 5.5m² @ 3mm Per 20kg
Bag Size: 20kg
Mixing: 6.8 litres of water per 20kg