Pro Tiler Tools
FREE Delivery over £299
Need help? 01604 859800
Finance over £250

Ardex X7W Flexible Standard Set Adhesive White S1 20kg

by Ardex

Brand Ardex

Standard Setting Flexible Wall & Floor Tile Adhesive

Excellent Workability And Slump Resistance

Suitable For Internal & External Use

Colour: White

Thicknesses: 1 - 6mm

Classification: C2 TE S1

Coverage: 8m² at 5mm per 20kg

Bag Size: 20kg

Product Code Price Quantity
18336

£27.00 INC VAT

£22.50 EX VAT

Work out how much you need

Using the calculator below, you can work out how much material you will need to get the job done. Please either enter your required area m2 or the width and length.

This is a rough guide calculation provided in good faith, actual usage may vary, please allow for wastage when placing your order. Pro Tiler Tools Ltd can't be held responsible for any under ordering.

Description

ARDEX X 7 G and ARDEX X 7 W are versatile multipurpose tile adhesives, with enhanced properties of adhesion, suitable for fixing ceramic, porcelain, glass mosaics, and most non-moisture sensitive natural stone floor and wall tiles. ARDEX X 7 G and ARDEX X 7 W are frost and weather-resistant, and can be used internally and externally as well as in wet areas and swimming pools.

The BS EN 12004 C2 TE S1 designation for ARDEX X 7 G and ARDEX X 7 W classifies the adhesives as 'Improved deformable cementitious adhesive with reduced slip and extended open time.' The additional characteristics for ARDEX X 7 G and ARDEX X 7 W determined in accordance with BS EN 12004, are a tensile adhesion strength of greater than 1 N/mm² as an initial adhesion value, greater than 1 N/mm² after water immersion, greater than 1 N/mm² after heat aging, and greater than 1 N/mm² after freeze thaw cycling, making this product suitable for internal and external locations, including swimming pools.

The mixed mortar has a slump-free consistency with high initial grab, enabling heavy wall tiles to be fixed, thus reducing the need for battens and spacers. ARDEX X 7 G and ARDEX X 7 W adhere strongly to most construction materials such as concrete, cement and sand renders and screeds, heated sub-floors, brickwork and blockwork, gypsum plaster, anhydrite screeds, plasterboard and existing ceramic tiled surfaces.

ARDEX X 7 G and ARDEX X 7 W can also be used for bonding rigid foam insulating materials, e.g. polystyrene, polyurethane, etc. For fixing tiles to internal wooden floors, consult the ARDEX X 7001 product data sheet. Due regard should also be given to the recommendations in the relevant parts of BS 5385 and sections of: BS 8000 : Part 11. ARDEX X 7 G and ARDEX X 7 W can be used to fix tiles to concrete or cement/sand screeds with under-floor heating.

Features: 
- Excellent workability and slump resistance.
- 5-hour pot life.
- Ideal for almost all tile types, including non-moisture-sensitive natural stone.
- Suitable for wall and floor applications.
- Suitable for internal and external areas.
- Suitable for use with underfloor heating.

Specification

Colour: White.
Bag Size: 20kg.
Weight of fresh mortar: Approximately 1.7kg/litre.
Initial Set (Vicat) DIN 1164: Approximately 5 hours.
Final Set (Vicat) DIN 1164: Approximately 18 hours.
Compressive Strength (DIN 1164): After 28 days, 17.9 N/mm².
Tensile Bending Strength (DIN 1164): After 28 days, 6.4 N/mm².
Open Time: Approximately 30 minutes.
Slip Resistance: Slip, less than 0.5mm.
Tensile Adhesion Strength: Greater than 1 N/mm² under all test conditions.
Coverage: 8m² at 5mm Per 20kg.
Depths: 1 - 6mm.
Mixing: Approximately 2½ parts ARDEX X 7 W powder: 1 part water. A 20kg bag of ARDEX X 7 W requires
approximately 6 litres of water.
Storage & Shelf Life: ARDEX X 7 G and ARDEX X 7 W must be stored in unopened packaging, clear of the ground in cool, dry conditions and be protected from excessive draught. If stored correctly, as detailed above, the shelf life of this product is 12 months from the date shown on the packaging.