BAL Grout Flex Wide Joint Flexible Tile Grout For Walls & Floors 5kg (Choice of Colour)

Your one stop tile tool shop

5kg Bags

3mm - 20mm Grout joint


300 x 300 x 9mm tile – 3mm grout joints – 3.26kg/m²

200 x 200 x 9mm tile – 3mm joints – 2.19kg/m²

Product Name
Price (ex)
Price (inc)
Work out how much you need

Using the calculator below, you can work out how much material you will need to get the job done. Please either enter your required area m2 or the width and length.

Estimated Total:

This is a rough guide calculation provided in good faith, actual usage may vary, please allow for wastage when placing your order. Pro Tiler Ltd can't be held responsible for any under ordering.


BAL Grout Flex Wide Joint is a water and frost resistant cementitious wide joint tile grout for walls and floors and is suitable for joint widths from 3mm to 20mm.

Suitable for grouting ceramics, mosaics and natural stone/quarry tiles, in dry or wet interior and exterior environments, Wide Joint comes in five key colours: White, Jasmine Cream, Light Grey, Mid Grey, and Dark Grey.

While recommended for swimming pools, BAL Grout Flex Wide Joint is not suitable for power showers, food preparation/storage areas and areas requiring waterproof grouting.

When grouting floor and wall tile projects with wide joints consider BAL Grout Flex Wide Joint. Perfect for swimming pools, areas of limited movement and heavily trafficked floors, Grout Flex Wide Joint is suitable for both commercial and domestic projects. With a pot life of 2 hours minutes and curing in 24 hours, Wide Joint comes in 10kg and 5kg packs. Smooth and easy to spread over larger floor areas.

Grouting porcelain, glazed and fully vitrified, glass and ceramic mosaics, marble and natural stone in dry and wet interior and exterior environments. Follow guidelines to BS Standards (minimum 2mm joints for walls and 3mm for floors, size can change depending on size of tile and environments), Contact BAL TECHNICAL ADVISORY AND SPECIFICATION SERVICE for more information.

• For Joint widths: 3mm to 20mm

• Recommended for swimming pools (hard water), and for limited movement areas including overlaid plywood floors (minimum 15mm) and heated screeds.

Restrictions: NOT suitable for

*Food preparation/*storage areas,

* Spas,

* Jacuzzis,

*Chemical Plants, Power Showers with body jets and areas requiring

*waterproof grouting.