FILA MP90 ECO XTREME Professional Stain-Proofing Repellent Protector ECO-Friendly

Your one stop tile tool shop

Natural finish stain-proofing sealant.

The best environmentally-friendly stain protection for porcelain tiles, natural stone, marble and granite with polished, brushed and matt honed finishes.

Reduces absorption without affecting the material's natural look.

Impregnates, protects, and makes cleaning easier.

It is also ideal for grouting joints, ceramic and crackle effect surfaces, grit, resin-marble, and stone slabs.

Is also suitable for treating coloured cement tiles and reconstructed stones.

Scratch resistant: by protecting the surface, scratches can be removed easily during the cleaning process.

 

Ideal For

  • Polished Porcelain Tiles
  • Marble
  • Granite
  • Natural Stone And Agglomerates

 

Coverage

With 1 litre:

  • Polished porcelain tiles 30-40 m2
  • Polished Marble/Granite 20-30 m2
  • Matte honed stone 10-20 m2

 

With 5 litres:

  • Polished porcelain tiles 150-200 m2
  • Polished Marble/Granite 100-150 m2
  • Matte honed stone 50-100 m2
Product Name
Price (ex)
Price (inc)
Options
Info
£44.00
£52.80
£188.06
£225.67
Description
Videos
Attachments

Advantages

  • This product has extremely low voc emissions: certified by gev and marked ec1plus.
  • Contributes towards leed credits.
  • Hydrocarbon solvent free: environmentally-friendly treatment.
  • Due to its water-base, it withstands residual humidity and can therefore be applied 24-48 hours after the initial wash, making treatment quicker.
  • Single-coat application: apply and rub in gently until completely absorbed.
  • Does not form surface film and does not yellow.
  • It is ideally suited for protecting kitchen and bathroom tops.
  • This product is tested and certified food-safe.
  • The surface can be walked on after just 4 hours.

 

Ideal For

  • Polished Porcelain Tiles
  • Marble
  • Granite
  • Natural Stone And Agglomerates

 

Warning

Before applying to the entire surface, test the product on a small area to check for colour changes. Do not apply the product externally if rain is forecast.

 

How to use 

Test patch recommended before use

No dilution required: Ready to use

 

Application

For natural stone with a matte honed finish:on dry clean surfaces apply FILAMP90 ECO PLUS ‘to saturation’ using a brush or fleece pad, working completely into the material. Remove any excess product that has not been absorbed using a cloth or kitchen paper.For natural stone with polished finish:apply an even coat of FILAMP90 ECO PLUS on dry clean surfaces using a brush or fleece pad. Leave for 10 minutes, and then use a cloth or kitchen paper soaked in the product to make sure the application is uniform and remove any unabsorbed excess. Rub it gently in to ensure it penetrates and remove any excess.For polished porcelain tile and dense polished marble:remove the excess after 4 hours in the same way as for polished materials.apply an even coat of FILAMP90 ECO PLUS on dry clean surfaces using a brush or fleece pad. Leave for 10 minutes, and then use a cloth or kitchen paper soaked in the product to make sure the application is uniform and remove any unabsorbed excess. Rub it gently in to ensure it penetrates and remove any excess.