by James Hardie
Heavy Duty Adhesive Foam
No Screws Needed
No Mixing, No Mess
Quick To Install
Size: 750ml
Coverage: 4-5 Sheets
| Product Code | Price | Quantity |
|---|---|---|
| 5300383 |
£11.99 INC VAT £9.99 EX VAT |
|
A heavy-duty fast fix adhesive, for the quick and easy install of HardieBacker tile backer board.
Instructions for use:
Substrates should be clean and free of dust and grease.
Shake can thoroughly for 30 seconds.
Fit the tube onto the valve.
Slightly dampen the surfaces.
Hold the can upside down and extrude the foam by pressing bar.
Apply adhesive in beads of about 3cm on HardieBacker Board, covering at least one-third of the surface when pressed.
Wait for about 5 minutes before fixing the board onto a vertical surface.
Press firmly for optimal grab and hold for 60 seconds.
Leave to cure for at least 60 mins before tiling.
After using, clean the nozzle and valve.
Apply HardieFoam™ adhesive in well-ventilated areas. Wear safety goggles and gloves.
Max weight of tiles, adhesive and grout on a wall construction is 50 kg/m².
To achieve 200 kg/m2, use nine masonry wall fixings per board.
Contents: Polymethylene polyphenyl isocyanate.
Packaging: Aerosol.
Size: 750ml.
Keep away from: Heat sources, ignition sources, (strong) acids, (strong) bases, and amines.
Odour: Characteristic odour.
Please See Data Sheet And Safety Sheet Attached For Further Information.
