Laticrete 335 Superflex Standard Set Flexible S1 Adhesive Grey 20kg

Order in the next {{data.days}} day, {{data.hours}} hour, {{data.minutes}} minute and {{data.seconds}} second Last chance for {{data.day}} delivery*

FREE UK Delivery On orders over £250net*

Need some help? Call us on 01604 859800

Finance Available On orders over £250*

Laticrete 335 Superflex Standard Set Flexible S1 Adhesive Grey 20kg

by Laticrete

High Performance

For Interior & Exterior Use

Suitable For Wet & Dry Areas

Extended Open Time Up To 30 min

Colour: Grey

Bag Size: 20kg

Coverage:
- 6 x 6mm Notched Trowel: 6.6 – 8.0m²
- 6 x 9mm Notched Trowel: 5.0 – 5.9m²
- 12 x 12mm Notched Trowel: 3.3 – 4.0m²

Product Code	Price	Quantity
0335-0050-21	£12.37 INC VAT £10.31 EX VAT	Out of stock

Work out how much you need

Using the calculator below, you can work out how much material you will need to get the job done. Please either enter your required area m2 or the width and length.

This is a rough guide calculation provided in good faith, actual usage may vary, please allow for wastage when placing your order. Pro Tiler Tools Ltd can't be held responsible for any under ordering.

Description

LATICRETE® 335 “Super-Flex” adhesive is a high-performance polymer fortified cementitious powder to be mixed with water to install low absorption ceramic, porcelain & vitrified tiles including natural stone using the thin-set method of installation.

Uses:
- For use in interior, exterior & fully immersed applications.
- Suitable for use in wet & dry areas including kitchens, bathrooms, wet-rooms.
- Fixes ceramic, stone & porcelain tiles to all substrate types including impermeable surfaces, WBP exterior glued plywood and heated sub-floors.
- Ideal for use in applications where a long open time is preferred.
- The long open time and high grab properties of this adhesive are optimised for fixing all tiles including porcelain and glass.

Suitable Substrates:
- Cement floor screed
- Concrete block & Render
- Ceramic tile & stone
- Heated sub-floors
- Masonry and brick
- Gypsum & Anhydrite
- Tile backer board*
- Gypsum plasterboard
- Exterior glue WBP Plywood***

Attachments

Laticrete 335 Super Flex Data Sheet.pdf

Specification

Colour: Grey
Bag Size: 20kg
Mixing: 5L water per 20kg
Coverage:
- 6 x 6mm Notched Trowel: 6.6 – 8.0m²
- 6 x 9mm Notched Trowel: 5.0 – 5.9m²
- 12 x 12mm) Notched Trowel: 3.3 – 4.0m²
Pot Life: 4 hours
Wet Density: 1.7 gm/cm³
Shelf Life: Factory-sealed sacks of this product are guaranteed to be of first quality for one (1) year* if stored off the ground in a dry area.

Laticrete 335 Superflex Standard Set Flexible S1 Adhesive Grey 20kg Full Pallet (54 Bags Tail-Lift)

£651.02 INC VAT

£542.52 EX VAT