Ideal for all stone surfaces especially less porous Porcelain & Polished Stone
Avaliable in 1 Litre & 5 Litre Tins
Protection Against Water & Oil Based Stains
Slow Dry
| Option | Product Code | Price | Quantity |
|---|---|---|---|
| 1 Litre Tin | VP160 |
£39.59 INC VAT £32.99 EX VAT |
Out of stock |
| 5 Litre Tin | VP160 5 Litre |
£191.99 INC VAT £159.99 EX VAT |
Out of stock |
Ideal for all stone surfaces especially less porous Porcelain & Polished Stone.
Protection against Water & Oil based stains!
Preserves & Protects without altering original colour or appearance!
Durable, Invisible, Stain Resistant Protection!
Resists UV Degradation!
Allows treated surfaces to Breathe!
Superior coverage per square metre!
POLISHED STONE & PORCELAIN APPLICATION INSTRUCTIONS:
Use as is. Test in obscure area to determine suitability for the intended use. Surface should be clean,
dry and free from any waxes, coatings or finishes. Protect any painted or stained surface adjacent to
the application area. Apply one good coat to the polished porcelain with a lambs wool mop, roller,
brush or pump sprayer. Leave for a minimum of five hours for drying and deep penetration, then
apply a second coat to the area. Buff treated area before the second coat is dry. Use a rag or a
buffing machine with soft pad. For optimum results, allow the treated surface to cure for 24 hours
after buffing. Use the same application directions for other highly polished surfaces, such as marble
or granite.
GENERAL APPLICATION INSTRUCTIONS FOR GROUT, TILE OR MASONRY PRODUCTS - FOR
BOTH INTERIOR AND EXTERIOR USE: Use as is. Test in obscure area to determine suitability for
the intended use. Surface should be clean, dry and free from any waxes, coatings or finishes.
Protect any painted or stained surface adjacent to application area. Apply to surface in a thin, even
coat with a pump, airless sprayer, brush, cloth, mop or roller. One coat is normally sufficent, but a
second application is recommended on more porous surfaces or heavy walkway areas to ensure
complete coverage. For optimum results, the treated area should be kept dry and free from soils for
at least 24 hours.
NOTE: IN COLD WEATHER, ALLOW UP TO 48 HOURS FOR FULL CURING.
APPLICATION ON DRY GROUT: On dry grout, make sure grout is clean and apply an even coat of sealer.
PRE-GROUT SEALER/GROUT RELEASE: Use as a grout release prior to grouting to prevent grout stains and facilitate grout cleanup.
MAINTENANCE: To clean treated areas, simply use water and mild detergent. Do not use harsh cleaning agents such as abrasive powders, ammonia, acids or bleach.
COVERAGE: 5 Litre will cover approximately up to 200m² depending upon the material to be treated and method of application.
HANDLING & STORAGE: Store and apply at temperatures between 40ºF (4ºC) and 90ºF (32ºC). Store in original container, keeping container tightly closed when not in use.
