Tilemaster FlexiLevel Fibre Reinforced Flexible Self Levelling Compound 25kg

Your one stop tile tool shop
In Stock

25kg Bag

Coverage: 25kg will cover 5.25m² at a depth of 3mm

Min Depth: 2mm

Max Depth: 50mm

Tile After: 3h

£14.40 ex vat
£17.28 inc vat
Work out how much you need

Using the calculator below, you can work out how much material you will need to get the job done. Please either enter your required area m2 or the width and length.

or
x &
Estimated Total:

This is a rough guide calculation provided in good faith, actual usage may vary, please allow for wastage when placing your order. Pro Tiler Ltd can't be held responsible for any under ordering.

Description
Features
Attachments

Tilemaster FlexiLevel is a fast setting, flexible and fibre reinforced self levelling compound. Tilemaster FlexiLevel has been specially formulated to allow the product to be poured to depths between 2mm – 50mm in one application and receive foot traffic after 3 hours.

Tilemaster FlexiLevel is suitable for a wide range of both commercial and domestic applications. Tilemaster FlexiLevel is suitable for use over a wide range of substrates including sand/cement screeds, concrete, flooring grade asphalt/bitumen, ceramic, porcelain and natural stone tiles and timber substrates – the minimum application depth onto timber substrates is 4mm.

Tilemaster FlexiLevel is also ideal for encapsulating electric underfloor heating elements and for use over underfloor heated screeds.

The fast setting properties of Tilemaster FlexiLevel allows for ceramic tiles to be laid after as little as 3 hours, and decorative floor coverings to be installed after 24 hours.

Under certain conditions, Tilemaster FlexiLevel is suitable for use externally. For further information please contact the Tilemaster Technical team on 01772 456831 or email info@tilemasteradhesives.co.uk for further information

COVERAGE: 20kg will cover 4.2m2 at 3mm thickness

PACK SIZES: 25kg

COLOURS: Grey

ADVANTAGES:

  • Install tiles after 3 hours and decorative floor coverings after 24 hours
  • Apply from 2 – 50mm in one application
  • Ideal for use above underfloor heating systems
  • Ideal for timber substrates
  • No additives required – simply mix with water
  • Low odour
  • Protein free

IDEAL FOR:

  • Sand/Cement Screed
  • Concrete
  • Plywood Overlay (6mm min)
  • Electric Underfloor Heating
  • Water/Wet System Underfloor Heating
  • Tile Backer Boards
  • Existing Ceramic, Porcelain and Natural Stone Tiles*
  • Flooring Grade Asphalt & Bitumen
  • Anhydrite Screeds
  • T & G Floorboards
  • Floating Floors
  • Existing Vinyl Tiles*
  • Steel/Metal Surfaces*
  • Epoxy DPM*
  • Existing Adhesive Residues
  • Fibreglass*
  • *Refer to Technical Data Sheet