Pro Tiler Tools
FREE UK Delivery On orders over £250net*
Need some help? Call us on 01604 859800
Finance Available On orders over £250*

Ultra Floor Level It Super 30 Two Part Rapid Setting Self Levelling Compound 20kg

20kg Bag & 4L Bottle

Use Over Most Common Subfloors

Under Floor Heating Compatible

Low Odour

Protein Free

Max Depth: 15mm

Tile After: 45 Mins

Coverage: Approx 6m² at 2mm

Product Code Price Quantity
LEVEL IT SUPER 30

£26.39 INC VAT

£21.99 EX VAT

Work out how much you need

Using the calculator below, you can work out how much material you will need to get the job done. Please either enter your required area m2 or the width and length.

This is a rough guide calculation provided in good faith, actual usage may vary, please allow for wastage when placing your order. Pro Tiler Tools Ltd can't be held responsible for any under ordering.

Description

UltraFloor Level IT Super30 is a high strength, rapid setting and drying smoothing underlayment. A two-component system consisting of a powered blend of high-specification cement, graded fillers and additives and a pre-gauged polymer liquid. UltraFloor Level IT Super30 is suitable for depths between 2-15mm.

Specifically designed for use over a wide variety of subfloors including concrete, sand & cement, calcium sulphate/anhydrite/hemihydrate screeds, damp proof membranes and underfloor heating systems. Floor coverings can be applied to internal subfloors within 90 minutes for bonded applications and in as little as 45 minutes for unbonded applications. UltraFloor Level IT Super30 is not a moisture-tolerant formulation, therefore it is not suitable for the pre-smoothing of subfloors prior to the application of a surface damp proof membrane (DPM) or a moisture vapour suppressant (MVS). It is also not suitable for applications where a damp proof course (DPC) is not present within the integrity of the building. Its protein-free formulation means that it can be used in biologically sensitive areas.

UltraFloor recommends that subfloors should be primed prior to the application of UltraFloor Level IT Super30.

Features:
Foot traffic in as little as 30 minutes
Ready to receive unbonded floor coverings after 45 minutes and bonded coverings in 90 minutes
Use over most common subfloors
Under Floor Heating compatible
Low odour Protein free

Specification

Specification: BS EN 13813:2002
Screed Classification: CT-C35-F7
Working time at 20°C: 10 mins
Walk on hardness time at 20°C: 30 mins
Ready to receive floor coverings (based on 3mm application):
- Unbonded - 45 minutes
- Bonded - 90 minutes
Compressive Strength (N/mm²) (to BS EN 13892-2):
- 1 Day: 20.0
- 7 Days: 29.0
- 28 Days: 35.0
Flexural Strength (N/mm²) (to BS EN 13892-2):
- 1 Day: 3.0
- 7 Days: 4.0
- 28 Days: 7.0
- Packaging: 20kg bag/4 litre bottle
Coverage Rates:
- @ 2mm - 6.0m²
- @ 5mm - 2.4m²
- @ 10mm - 1.2mm²

)