UltraFloor Suppress IT is a single component, two-coat rapid drying moisture suppressant primer membrane. It has a water-based, solvent-free formulation and is designed to suppress residual construction moisture – up to 95% relative humidity in cementitious subfloors (when tested with a properly calibrated surface hygrometer in accordance with BS 8203). Thus allowing earlier installation of floor coverings. The product is pigmented orange enabling easy identification and coverage control in applied areas.
Specifically designed for use over a variety of substrates including concrete floors, sand/cement screeds and most absorbent construction materials. It is not suitable for use with very dense substrates. When the product is to be used with underfloor heating (please contact UltraFloor Technical Services for further information). NOTE: UltraFloor Suppress IT should not be used in projects where hydrostatic pressure is a concern. In such cases, the use of pressure relief drainage and/or external tanking systems must be the primary method of protection against moisture.