Ultra Tile Fix ProPave Mortar Fibre Modified Cement Binder 20kg

UltraTile ProPave Mortar is a fibre-modified cement binder that, when mixed with graded aggregates and water, can produce a rapid-drying high-strength bedding mortar ready to receive floor finishes such as porcelain/natural stone tiles etc. UltraTile ProPave Mortar can be used to form falls within patios and driveways.

Can accept light foot traffic after 12 hours. For highly trafficked areas such as drives and paths, curing will require a least 24 hours in good conditions.
Rapid reinstatement where early trafficking is required
Suitable for Porcelain/ Natural Stone tiles
Suitable for external use
Patching and repairing

Features:
For use with type 1 hardcore.
Fast track installation.
Fibre-reinforced for added strength and durability.
Simply mix with sharp sand and water.
Dual-mix ratio for heavy or light trafficked areas.
Maintains porosity to facilitate drainage.
Approved for use with Porcelain and Natural Stone.
Depth: 30-100mm.
Internal and external use.
Part of the ProPave External Tiling System.

*PRECAUTIONS
Wall types vary considerably but all have the same basic need to be structurally sound, strong, smooth and level.  It is essential that the wall to be tiled has sufficient inherent strength to hold the proposed tile and the adhesive being used.  The following chart lists the maximum national standard loadings for a variety of wall substrates:   
Do NOT mix UltraTileFix ProPave Mortar with other cements or binders.
Do NOT dry mix with aggregate and leave.
Do NOT overwater UltraTileFix ProPave Mortar.
Do NOT add water or re-agitate the mortar once the setting has started.
Do NOT use fine sand - only use aggregate grading as in BS EN 13139 (0/8).
USE UltraTileFix ProPave Mortar as soon as it is mixed.