Diamond Blades (Tiling) Suppliers

With a diameter of only 85 mm and a thickness of 1 mm, the diamond blade TCS85 is the perfect solution for cutting very small square holes usually necessary for switch boxes and sockets.

85 x 1mm

22.2mm Bore

Will fit all 115mm angle grinders.

Size: 170mm

Bore: 22,2mm

Size: 70mm

Bore: 22,2mm

Montolit CM 100mm Diamond Blade For Glass Mosaic & Natural Stone

100 x 22.2mm 

Diamond Blade for small tile saws

Glass Mosaic & Natural Stone

For cutting and grinding natural stone, all kind of ceramic tiles and synthetic materials. Fine grinding

For thicknesses

Electroplated continuous rim blade.

For use in grinders. Connection: Thread M14

115mm - 31964

Recommended electroplated diamond blade to cut marble, limestone and fibers.

Less vibration. To cut those materials with high risk of breaking, as marble and fibers.

Only for straight cuts, not suitable for mitring.

Type: 20mm Vitrified Porcelain

Use: Dry

Materials: Vitrified 2cm Porcelain, Ceramics, Granite

To fit Wet Saws

Totally Satisfied or Your Money Back. (30 Day Money Back Guaranteed)

For cutting and grinding natural stone, all kind of ceramic tiles and synthetic materials. Fine grinding

For thicknesses

Electroplated continuous rim blade.

For use in grinders. Connection: Thread M14

125mm - 31965

Recommended electroplated diamond blade to cut marble, limestone and fibers.

Less vibration. To cut those materials with high risk of breaking, as marble and fibers.

Only for straight cuts, not suitable for mitring.

Type: 20mm Vitrified Porcelain

Use: Dry

Materials: Vitrified 2cm Porcelain, Ceramics, Granite

To fit Wet Saws

Totally Satisfied or Your Money Back. (30 Day Money Back Guaranteed)

Recommended electroplated diamond blade to cut marble, limestone and fibers.

Less vibration. To cut those materials with high risk of breaking, as marble and fibers.

Only for straight cuts, not suitable for mitring.

To fit Wet Saws

Totally Satisfied or Your Money Back. (30 Day Money Back Guaranteed)

Type: 20mm Vitrified Porcelain

Use: Dry

Materials: Vitrified 2cm Porcelain, Ceramics, Granite

To fit Wet Saws

Totally Satisfied or Your Money Back. (30 Day Money Back Guaranteed)

To fit Wet Saws

Totally Satisfied or Your Money Back. (30 Day Money Back Guaranteed)

Type: 20mm Vitrified Porcelain

Use: Dry

Materials: Vitrified 2cm Porcelain, Ceramics, Granite

Type: 20mm Vitrified Porcelain

Use: Dry

Materials: Vitrified 2cm Porcelain, Ceramics, Granite

To fit Wet Saws

Totally Satisfied or Your Money Back. (30 Day Money Back Guaranteed)

To fit Wet Saws

Totally Satisfied or Your Money Back. (30 Day Money Back Guaranteed)

To fit Wet Saws

Totally Satisfied or Your Money Back. (30 Day Money Back Guaranteed)

To fit Wet Saws

Totally Satisfied or Your Money Back. (30 Day Money Back Guaranteed)

To fit Wet Saws

Totally Satisfied or Your Money Back. (30 Day Money Back Guaranteed)

115mm x 22.2mm 31972

Recommended blade for cutting:

Hard Materials

Porcelain

Size: 115mm

Bore: 22.2mm

Brand: Sigma

For Cutting:  All tiles, including Porcelain,  Granite & Stone

Blade thickness 1.2mm

Performance:

Speed: Low

Finish: High

Life span: High

Use: angle /flexible grinder

Performance:

Speed: High

Finish: Good

Life span: High

Use: angle /flexible grinder

Performance:

Speed: Very high

Finish: Very high

Life span: Very high

Use: angle /flexible grinder

For Cutting:  All tiles, Natural stone, Porcelain & Granite.

To fit 4" Angle Grinders

115mm x 22.2mm Bore

ONLY 1.2MM THICK

Suitable for Porcelain, Granite, Slate, Ceramic, Stone etc

Diameter: 110mm.

Performance:

Speed: Very high

Finish: Very high

Life span: Very high

Use: angle /flexible grinder

1.3mm Thick

Type: Turbo

Use: Dry

Bore Size: 22.2mm

Thickness: 1.80mm

180mm Diamond Blade For The Perfect Cut CPF180

Only 1.3mm Thick for Finer Cuts

A particular world patent called DNA holds the key to position the diamond in the best angle of the blade, allowing to make outstanding cuts on any ceramic tile. This technology greatly increases the cutting capacity of the wet saw, with a performance sometimes 100% higher than that of similar blades. Thanks to these specific characteristics, the SCX diamond blade is now one of the few available on the market able to cut very hard and thick porcelain tile (up to 3 cm)

STL 115GG is an innovative Multi-Purpose diamond cup designed for finishing tiles: beveling, small cuts, grinding, rounding and shaping edges and corners.

STL115GG is made with MEDIUM GRANE diamonds and is suitable for working on hard stone materials such as porcelain tiles, granite, concrete.

STL 115GF is an innovative Multi-Purpose diamond cup designed for finishing tiles: beveling, small cuts, grinding, rounding and shaping edges and corners.

STL115GF is made with FINE GRANE diamonds and is suitable for working also on soft stone materials such as porcelain tiles, ceramic, marble, travertine etc.

Type: Turbo

Use: Dry

115mm x 22.2 Ultra Thin Turbo Diamond Blade 1831.1

Battipav Fast Cut Turbo Diamond Blade

250mm

25.4mm Bore Size

2.1mm Thick

Wet Use Only

For Use With Porcelain, Marble, Granite & Natural Stone

Recommended blade for cutting:

Hard Materials

Porcelain

125mm x 22.2mm 31973

Recommended blade for cutting:

Hard Materials

Porcelain

Type: Turbo

Use: Dry

Bore Size: 22.2mm

Thickness: 1.80mm

200mm Diamond Blade For The Perfect Cut CPF200

Excellent for cutting:

Only 1.3mm Thick for Finer Cuts

A particular world patent called DNA holds the key to position the diamond in the best angle of the blade, allowing to make outstanding cuts on any ceramic tile. This technology greatly increases the cutting capacity of the wet saw, with a performance sometimes 100% higher than that of similar blades. Thanks to these specific characteristics, the SCX diamond blade is now one of the few available on the market able to cut very hard and thick porcelain tile (up to 3 cm)

STL 115GG is an innovative Multi-Purpose diamond cup designed for finishing tiles: beveling, small cuts, grinding, rounding and shaping edges and corners.

STL115GG is made with MEDIUM GRANE diamonds and is suitable for working on hard stone materials such as porcelain tiles, granite, concrete.

STL 115GF is an innovative Multi-Purpose diamond cup designed for finishing tiles: beveling, small cuts, grinding, rounding and shaping edges and corners.

STL115GF is made with FINE GRANE diamonds and is suitable for working also on soft stone materials such as porcelain tiles, ceramic, marble, travertine etc.

Type: Turbo

Use: Dry

To fit Wet Saws

125mm x 22.2 Smooth Cut Diamond Blade 1832.1125.22

Smooth, Clean Cut.

Wet or Dry Applications

Battipav Fast Cut Turbo Diamond Blade

250mm

25.4mm Bore Size

2.1mm Thick

Wet Use Only

For Use With Porcelain, Marble, Granite & Natural Stone

Recommended blade for cutting:

Very fine high speed straight cutting

of Porcelain

Recomended blade for cutting:

Marble, Brick

Terrazzo, Sandstone

Limestone, Slate

180mm x 22.2mm 31975

Recommended blade for cutting:

Hard Materials

Porcelain

230mm Diamond Blade For The Perfect Cut CPF230

A particular world patent called DNA holds the key to position the diamond in the best angle of the blade, allowing to make outstanding cuts on any ceramic tile. This technology greatly increases the cutting capacity of the wet saw, with a performance sometimes 100% higher than that of similar blades. Thanks to these specific characteristics, the SCX diamond blade is now one of the few available on the market able to cut very hard and thick porcelain tile (up to 3 cm)

Type: Turbo

Use: Dry

Recommended blade for cutting hard materials such as: Granite, Rustic Tiles, Clinker, Refractory, Slate & Porcelain.

Recommended blade for cutting hard materials such as: Granite, Rustic Tiles, Clinker, Refractory, Slate and Porcelain Tile.

230mm x 22.2mm 31978

Recommended blade for cutting:

Hard Materials

Porcelain

250mm Diamond Blade For The Perfect Cut CPF250

Excellent for cutting:

A particular world patent called DNA holds the key to position the diamond in the best angle of the blade, allowing to make outstanding cuts on any ceramic tile. This technology greatly increases the cutting capacity of the wet saw, with a performance sometimes 100% higher than that of similar blades. Thanks to these specific characteristics, the SCX diamond blade is now one of the few available on the market able to cut very hard and thick porcelain tile (up to 3 cm)

Type: Turbo

Use: Dry

150mm x 22.2/25.4 Ultra Thin Turbo Diamond Blade 1

To fit Wet Saws

150mm x 22.2/25.4 Smooth Cut Diamond Blade 1832.11

Smooth, Clean Cut.

Wet or Dry Applications

300mm Diamond Blade For The Perfect Cut CPF300

Excellent for cutting:

A particular world patent called DNA holds the key to position the diamond in the best angle of the blade, allowing to make outstanding cuts on any ceramic tile. This technology greatly increases the cutting capacity of the wet saw, with a performance sometimes 100% higher than that of similar blades. Thanks to these specific characteristics, the SCX diamond blade is now one of the few available on the market able to cut very hard and thick porcelain tile (up to 3 cm)

Type: Turbo

Use: Dry

180mm x 22.2/25.4 Ultra Thin Turbo Diamond Blade 1

Recommended blade for cutting

Porcelain, Granite,

Sandstone, Slate,

Gres, Ceramic

Recommended blade for cutting:

All Grades of Porcelain

Recommended blade for cutting:

Hard Materials

Porcelain, Slate

Granite , Gres

Glass, Natural Stone

350mm Diamond Blade For The Perfect Cut CPF350

Excellent for cutting:

A particular world patent called DNA holds the key to position the diamond in the best angle of the blade, allowing to make outstanding cuts on any ceramic tile. This technology greatly increases the cutting capacity of the wet saw, with a performance sometimes 100% higher than that of similar blades. Thanks to these specific characteristics, the SCX diamond blade is now one of the few available on the market able to cut very hard and thick porcelain tile (up to 3 cm)

Type: Turbo

Use: Dry

200mm x 25.4 Ultra Thin Turbo Diamond Blade 1831.1

To fit Wet Saws

200mm x 25.4 Smooth Cut Diamond Blade 1832.1200.25

Smooth, Clean Cut.

Wet or Dry Applications

Type: Turbo

Use: Dry

To fit Wet Saws

200mm x 30.0 Smooth Cut Diamond Blade 1832.1200.30

Smooth, Clean Cut.

Wet or Dry Applications

Type: Turbo

Use: Dry

230mm x 22.2/25.4 Ultra Thin Turbo Diamond Blade 1

To fit Wet Saws

230mm x 22.2/25.4 Smooth Cut Diamond Blade 1832.12

Smooth, Clean Cut.

Wet or Dry Applications

Type: Turbo

Use: Dry

Type: Turbo

Use: Dry

100mm Diamond Blade For Glass CPV100

Size: 115mm

Bore: 22.2mm

Brand: Sigma

Cleans and sharpens clogged Diamond Blades and Diamond Hole Cutters so they cut like new.

For Cutting: Wood - Plastic - Vinyl - Laminate

To fit 4" Angle Grinders

115mm x 22.2mm Bore

By far the best cutting tool for your cordless machine... or your money back!

For Cutting:  All tiles, Natural stone, Porcelain & Granite.

To fit 4½" Angle Grinders

125mm x 22.2mm Bore

ONLY 1.2MM THICK

By far the best cutting tool for your cordless machine... or Your Money Back. (30 Day Money Back Guaranteed)

Suitable for Porcelain, Granite, Slate, Ceramic, Stone etc

Diameter: 110mm.

Battipav 300mm Segmented J Slot Diamond Blade For Marble & Granite

25.4mm Bore Size

Wet Use Only

Best for Granite but can also be used for Marble & Natural Stone.

Cleaning block for diamond blades

Must be used dry

200 x 50 x 25mm

For Cutting:  All tiles, including Porcelain,  Granite & Stone

Blade thickness 1.2mm

125mm x 22.2mm

180mm Diamond Blade For Glass CPV180

STL 125GG is an innovative Multi-Purpose diamond cup designed for finishing tiles: beveling, small cuts, grinding, rounding and shaping edges and corners.

Straight and perfect cuts, nothing more simple using TUTORCUT, an easy but effective and revolutionary tool.

It can be put on every sngle grinder, you only need to put it on its axle and is blocked ,safe and ready to go.

200mm Diamond Blade For Glass CPV200

STL 125GG is an innovative Multi-Purpose diamond cup designed for finishing tiles: beveling, small cuts, grinding, rounding and shaping edges and corners.

250mm Diamond Blade For Glass CPV250

Fitting: M14

Size: 4 Inch

For cleaning of diamond blades.

For use in a standard 4" angle grinder.

Ultra Thin & Lightening Fast.

Type: Turbo

Use: Dry

Bore Size: 22.2mm

Thickness: 1.65mm

Suitable for:

Porcelain

Granite

Slate

Ceramic

Stone etc

Diameter: 110mm.

Diamond Blade Bore Reducing Ring

200mm x 30.0 Diamond Blade 60B

Diamond Blade Bore Reducing Ring

230mm x 30.0 Diamond Blade 86C

Diamond Blade Bore Reducing Ring

250mm x 30.0 Diamond Blade 79C

Diamond Blade Bore Reducing Ring

300mm x 30.0 Diamond Blade 74C

Fitting: M14

Size: 4 Inch or 5 Inch available