Tile Backer Boards Suppliers

JACKOBOARD Galvanised Board Washers

Designer style washbasin.

Create the impression of a free floating wall basin.

Water-repellent Thickness: 4mm – 60mm Easy to work with Can be covered directly with tiles, render or plaster Thermally insulating Can be cut to any dimension Can be installed on nearly any substrate

For mounting JACKOBOARD® Plano 5 pieces/m2 Dowel hole ø 8 mm Available Lengths: 50,80,110 & 140mm Quantity per pack: 50 & 80mm 20 Quantity per pack: 110 & 140mm 10

For completely Watertight Joints in shower areas

JACKOBOARD Steam and Wet Room Seating kits are the simple, waterproof, cost effective and flexible wat to create stylish tiled seating in Steam Rooms and Wet Rooms.

JACKOBOARD Steam and Wet Room Seating kits are the simple, waterproof, cost effective and flexible wat to create stylish tiled seating in Steam Rooms and Wet Rooms.

The complete solution for finishing consealed WC systems

The JACKOBOARD® Sabo installation kit enables fast and easy cladding of all standard consealed WC cistern.

This two-piece special element made of water-repellent extruded polystyrene foam (XPS) has machined holes to accommodate all standard toilet connections.

With extremely high compressive strength, its special coating on both sides also permits the time-saving direct application of tiles.

JACKOBOARD Steam and Wet Room Seating kits are the simple, waterproof, cost effective and flexible wat to create stylish tiled seating in Steam Rooms and Wet Rooms.

Length: 1200mm

CROSSWAYS SLOTTED

A bendable and adaptable construction board.

JACKOBOARD® Flexo Plus: Smallest internal bending radius is 90mm (Coated one side)

JACKOBOARD® Flexo: Extremely small bending diameters with 30 mm thickness: inside 240 mm, and with 50 mm thickness: inside 480 mm (Coated both sides)

Size: 1300 x 600mm

LENGTHWAYS SLOTTED

A bendable and adaptable construction board.

JACKOBOARD® Flexo: Extremely small bending diameters with 30 mm thickness: inside 240 mm, and with 50 mm thickness: inside 480 mm (Coated both sides)

JACKOBOARD® Flexo Plus: Smallest internal bending radius is 90mm (Coated one side)

Size: 2600 x 600mm

CROSSWAYS SLOTTED

A bendable and adaptable construction board.

JACKOBOARD® Flexo: Extremely small bending diameters with 30 mm thickness: inside 240 mm, and with 50 mm thickness: inside 480 mm (Coated both sides)

JACKOBOARD® Flexo Plus: Smallest internal bending radius is 90mm (Coated one side)

Size: 1300 x 600mm

A bendable and adaptable construction board.

JACKOBOARD® Flexo: Extremely small bending diameters with 30 mm thickness: inside 240 mm, and with 50 mm thickness: inside 480 mm (Coated both sides)

JACKOBOARD® Flexo Plus: Smallest internal bending radius is 90mm (Coated one side)

Sizes available: 1300 x 600 & 2600 x 600mm

JACKOBOARD waterproofed Wall Niches are an elegant way to create more storage space in your bathroom.

Sizes available: 350 x 250 x 100, 350 x 250 x 150, 350 x 350 x 100, 350 x 350 x 150, 350 x 450 x 100, 350 x 450 x 150, 350 x 1600 x 150.

Bath panel with height adjusting feet to create the perfect fit bath side & end panels

Including adjustable feet

Time-saving and contemporary: Washstands & shelving units

The JACKOBOARD® Modula installation kits saves time and effort in the construction custom bathroom furniture.

They contain all parts to build a tileable piece of bathroom furniture.

Their special coating on both sides also permits direct application of tiles, plaster or filler.

The elements are easy to work with and particularly suitable for rooms with high moisture.

The JACKOBOARD Aqua Circle shower element enables fast and easy construction of an attractive, level access, high quality circular shower cubicle.

JACKOBOARD Aqua Spiral shower elements are ideally suited for creating elegant, customized barrier-free shower cubicles.

Available in Left & Right Hand Entrance

General purpose construction board for interior use Special non-woven coating for extra smooth finish Can be painted, wallpapered, plastered or tiled Taper edge to facilitate taped joints

General purpose construction board for interior use Special non-woven coating for extra smooth finish Can be painted, wallpapered, plastered or tiled Taper edge to facilitate taped joints

Water-repellent Thickness: 10mm – 80mm Easy to work with Can be covered directly with tiles, render or plaster Thermally insulating Can be cut to any dimension Can be installed on nearly any substrate

Thickness 6mm

Features:

Thickness - 12.5mm

Internal measurement - 205mm x 205mm x 85mm

External Measurement - 270mm x 270mm x 100mm

Sheet size: 62.5cm x 125cm 

Sheet coverage: 0.78m²

Available in multiple thicknesses

Sizes Available: 4, 6, 10, 12.5, 20, 30, 40, 50, 60, 70, 80mm

Tile ready service

Enhances underfloor heating

Sound reduction 19DB

Waterproof

Lightweight

Suitable for external use

Thickness 12mm

Features:

Water resistant

Mould resistant

Fire resistant

Strongest on the market

Easy to install

Sheet size: 62.5cm x 260cm 

Sheet coverage: 1.62m²

Available in multiple thicknesses

Thickness - 12.5mm

Internal measurement - 310mm x 310mm x 85mm

External Measurement - 400mm x 400mm x 100mm

Manufactured with pre-determined falls of min 1%

DeltaBoard Can be used to raise the floor before using DeltaWedge

Manufactured with pre-determined falls of min 1%

DeltaBoard Can be used to raise the floor before using DeltaWedge

Thickness - 12.5mm

Internal measurement - 300mm x 510mm x 85mm

External Measurement - 390mm x 600mm x 100mm

No screws needed

No mixing, no mess

Quick to install.

750ml

Sheet is sent flat and then can be formed by removing the adhesive strip

Sheet size: 62.5cm x 260cm

Segment size: 31.25cm x 31.25cm

25mm x 5mm

Bag of 100

PZ2

Wood & Metal use

Thickness - 12.5mm

Internal measurement - 200mm x 150mm x 85mm

                                    - 200mm x 300mm x 85mm

External Measurement - 270mm x 600mm x 100mm

Sheet is sent flat and then can be formed by removing the adhesive strip

Sheet size: 62.5cm x 260cm

Thickness: 19mm

Cut Direction: Length

Suitable for internal & external use

Cut Direction: Width

Suitable for internal & external use

51mm x 15m Roll

Alkaline Resistant

Glass Fibre Mesh

Thickness - 12.5mm

Internal measurement - 300mm x 150mm x 85mm

                                     - 300mm x 300mm x 85mm

External Measurement - 390mm x 600mm x 100mm

Sheet size: 62.5cm x 260cm 

Sheet coverage: 1.62m²

Available in multiple thicknesses

Simple score and snap

Make 2-3 passes with a HardieBacker Score and Snap Knife or any utility knife.

Fully Waterproof

Saves time and money

Available in four different sizes

Fully Waterproof

Saves time and money

Available in four different sizes

600mm Tall

30mm Thick

Supplied with adjustable feet

Fully Waterproof

Saves time and money

Available in four different sizes

Fully Waterproof

Saves time and money

Available in four different sizes

Available in Grey or White

290ml

No framework required

Do not require a coat of skim

Can be painted or tiled straight on top

2.4m Length

10m Roll

Waterproof

120mm Wide

Schlüter®-KERDI-COLL is a two-component sealant adhesive based on a solvent-free acrylate dispersion and a reactive cementitious powder.

Metal spreader included. Coverage:  1.85kg = 10.88 Linear M 4.25kg = 25 Linear M

Available in either:

Bag of 50 Washers

Bag of 100 Washers

Available in 35mm (200pcs) or 55mm (100pcs)

Coarse thread screws

Pack of 100

Size 36mm

Available in either:

25mm Screws & 35mm Washers

45mm Screws & 35mm Washers

110mm Galvanised Steel Anchor

Pack of 25 pieces

Available in 5m or 30m rolls

0.1mm Thickness

Waterproof