Buy Montolit Products Online

Cutting Length: 440mm

Diagonal Cutting Length: 310mm

Cutting Length: 520mm

Diagonal Cutting Length: 370mm

Cutting Length: 630mm

Diagonal Cutting Length: 440mm

Cutting Length: 750mm

Diagonal Cutting Length: 530mm

Cutting Length: 930mm

Diagonal Cutting Length: 660mm

Cutting Length: 1250mm

Diagonal Cutting Length: 880mm

Cutting Length: 1550mm

Diagonal Cutting Length: 1090mm

Cutting Length: 3400mm

Max Cutting Height: 10mm

Comes With:

3x 1200mm Rails

1x Splitting Device

1x Scoring Cart

1x Transport Bag

Cutting Length: 220mm

Diagonal Cutting Length: 150mm

Fits Ranged: 44P3, 52P3

Fits Ranges: 63P3, 75P3, 93P3

Fits Ranges: 125P3, 155P3

Fits Ranges: Masterpiuma P3

Fits Ranges: Masterpiuma P3

Fits Ranges: 125P3, 155P3

Suitable for: All Masterpiuma Cutters

Tile alignment bracket to fit most manual tile cutters.

Fits Ranges: Masterpiuma P2

The assorted parts kit contains the most common wear items for the Montolit Tile Cutters.

Replacement breaker feet for Montolit manual Tile Cutters.

Fits Ranges: Masterpiuma

Fits Ranges: 44P3 & 52P3

Fits Ranges: 63P3, 75P3, 93P3, 125P3, 155P3

Fits Ranges: 

Masterpiuma

Minipiuma

Minimontolit

Fits Ranges: 

Masterpiuma

Minipiuma

Minimontolit

180mm x 25.4/22.2mm

200mm x 30/25.4mm

230mm x 30/25.4mm

250mm x 30/25.4mm

300mm x 30/25.4mm

350mm x 30/25.4mm

Excellent for cutting:

Excellent for cutting:

Excellent for cutting:

Excellent for cutting:

A particular world patent called DNA holds the key to position the diamond in the best angle of the blade, allowing to make outstanding cuts on any ceramic tile. This technology greatly increases the cutting capacity of the wet saw, with a performance sometimes 100% higher than that of similar blades. Thanks to these specific characteristics, the SCX diamond blade is now one of the few available on the market able to cut very hard and thick porcelain tile (up to 3 cm)

A particular world patent called DNA holds the key to position the diamond in the best angle of the blade, allowing to make outstanding cuts on any ceramic tile. This technology greatly increases the cutting capacity of the wet saw, with a performance sometimes 100% higher than that of similar blades. Thanks to these specific characteristics, the SCX diamond blade is now one of the few available on the market able to cut very hard and thick porcelain tile (up to 3 cm)

A particular world patent called DNA holds the key to position the diamond in the best angle of the blade, allowing to make outstanding cuts on any ceramic tile. This technology greatly increases the cutting capacity of the wet saw, with a performance sometimes 100% higher than that of similar blades. Thanks to these specific characteristics, the SCX diamond blade is now one of the few available on the market able to cut very hard and thick porcelain tile (up to 3 cm)

A particular world patent called DNA holds the key to position the diamond in the best angle of the blade, allowing to make outstanding cuts on any ceramic tile. This technology greatly increases the cutting capacity of the wet saw, with a performance sometimes 100% higher than that of similar blades. Thanks to these specific characteristics, the SCX diamond blade is now one of the few available on the market able to cut very hard and thick porcelain tile (up to 3 cm)

A particular world patent called DNA holds the key to position the diamond in the best angle of the blade, allowing to make outstanding cuts on any ceramic tile. This technology greatly increases the cutting capacity of the wet saw, with a performance sometimes 100% higher than that of similar blades. Thanks to these specific characteristics, the SCX diamond blade is now one of the few available on the market able to cut very hard and thick porcelain tile (up to 3 cm)

A particular world patent called DNA holds the key to position the diamond in the best angle of the blade, allowing to make outstanding cuts on any ceramic tile. This technology greatly increases the cutting capacity of the wet saw, with a performance sometimes 100% higher than that of similar blades. Thanks to these specific characteristics, the SCX diamond blade is now one of the few available on the market able to cut very hard and thick porcelain tile (up to 3 cm)

Performance:

Speed: Low

Finish: High

Life span: High

Use: angle /flexible grinder

100mm x 22.2mm

180mm x 30/25.4mm

200mm x 25.4/30mm

250mm x 25.4/30mm

Only 1.3mm Thick for Finer Cuts

Only 1.3mm Thick for Finer Cuts

Performance:

Speed: High

Finish: Good

Life span: High

Use: angle /flexible grinder

With a diameter of only 85 mm and a thickness of 1 mm, the diamond blade TCS85 is the perfect solution for cutting very small square holes usually necessary for switch boxes and sockets.

85 x 1mm

22.2mm Bore

Will fit all 115mm angle grinders.

Performance:

Speed: Very high

Finish: Very high

Life span: Very high

Use: angle /flexible grinder

Replacement Titanium Scoring Wheel For The Following Cutters:

Flash Line Evo 300-FL-EVO

26PB 36cm

43PB 45cm

Montolit Replacement Titanium Scoring Wheel 241T For Old MasterMontolit

MOTO-Flashline MOTORIZED DRY cutting SYSTEM for SLABS AND Porcelain tiles, GRANITE, MARBLE from 0 to 340 cm (134”)

Includes

Moto saw machine with carry case

3 x 120cm rails with carry case

Montolit Porcelain, Glass & Mosaic Tile Nipps/Nippers

Perfect For Cutting Small Strips Off Hard Porcelain, Glass & Mosaic Tile Materials

Montolit Porcelain, Glass & Mosaic Tile Nippers

Perfect For Cutting Small Strips Off Hard Porcelain, Glass & Mosaic Tiles

Performance:

Speed: Very high

Finish: Very high

Life span: Very high

Use: angle /flexible grinder

1.3mm Thick

Straight and perfect cuts, nothing more simple using TUTORCUT, an easy but effective and revolutionary tool.

It can be put on every sngle grinder, you only need to put it on its axle and is blocked ,safe and ready to go.

Cooling fluid for optimal performance of diamond core bits (diameters upto 12mm) during drilling switch the machine off and sink the core bits into fluid for a couple of seconds.

Genuine replacement measure square for all Masterpiuma Tile Cutters.

Mini Montolit is the perfect little tile cutter for kitchen, cloackrooms and bathrooms.

26A2

36cm Maximum Cutting Length

25 x 25cm Maximum Diagonal Cutting Length

20mm Maximum Cutting Thickness

Weight 2.8kg 

Mini Montolit is the perfect little tile cutter for kitchen, cloakrooms and bathrooms.

43A2

45cm Maximum Cutting Length

31 x 31cm Maximum Diagonal Cutting Length

20mm Maximum Cutting Thickness

Weight 3.5kg

Blade Size: 180mm

Voltage: 240v

Weight: 7.1kg

Max carry weight 80kg

Max size 3600mm x 1800mm

Max carry weight 40kg

Max size 1500mm

Replacement pump suction cup for Montolit Stick/Superstick lifting systems

Ready to use, simple, Fast, Precise, Easy to handle.

Porcelain Stoneware, Ceramic, Marble, Granite.

Jolly cuts, bevel, rounded profiles on ceramic, porcelain and any stone material , in an easy way. sure.

Length: 180cm 

Length When Extended: 240cm

Width: 115cm

Width When Extended: 150cm

Height Adjustable

Weight: 38kg

Comes With 2 Connectors To Join 2 Tables Together.

This Listing Is For ONE Table.

Pack of 4

Large suction cup 200mm, equipped with a “vacuum” safety gauge that will show instantaneously any loss of adhesion with the tile.

This innovation is a superb indication for the advantage of security over safety.

Ideal for cutting for ceramics and glass. A practical cutter for tile layers, electricians and plumbers.

This professional Snap tile Cutter works extremely well also for cutting large format thin tiles. It gives you the possibility to make a fine and accurate incision on the porcelain or ceramic surface.

Harmonious curve cuts are also possible with this specific snap tile cutter.

Please Note This Is Not A Hole Cutter, It Is For Beveling And Cleaning Pre Drilled Holes

Montolit Mondrillo Diamond Countersink Tool M14

Use to clean up chipped or shelled holes cut in the tile

For use with an angle grinder

Wet or dry use

Suitable for porcelain, stoneware, ceramic, marble, granite and glass

FPU is a versatile milling bit designed to englare, shape and/or round bevel existing holes in Porcelain, Hard Ceramic, Granite and Marble.

FPU is also suitable to easily create round side indentation necessary to accomodate pipes or electric wire lines.

Fits: 970T Tornado Wet Tile Saw

Fits: 970T Tornado Wet Tile Saw

Only for glass mosaic not for glass tiles

Montolit CM 100mm Diamond Blade For Glass Mosaic & Natural Stone

100 x 22.2mm 

Diamond Blade for small tile saws

Glass Mosaic & Natural Stone

115mm x 22.2mm

Available in 115mm or 125mm

Removal of Tile Adhesive, Epoxy & Glue

125mm x 22.2mm

Available in 115mm or 125mm

Removal of Tile Adhesive, Epoxy & Glue

This extension kit fits both the Flash Line EVO and Flash Line MOTO

Both bars joint together to make 120cm

The kit contains: 1 40cm bar 1 80cm bar

BATTILE is a vibrating suction cup able to remove the air from the glued tiles right after installation, this procedure is crucial to ensure perfect adhesion of the tile to the floor/wall and to avoid future cracks on material.

Dual Splitting System Pliers 56RJ

Max tile thickness 15mm

Dual Splitting System Pliers 56R

Max tile thickness 20mm

Suitable for Porcelain, Granite, Marble, Ceramic

M14 Female thread to fit directly to angle grinder

Bevel & Bullnose grinding head to fit the Montolit TOPROFILE Machine.

Bevel & Bullnose grinding head to fit Angle Grinders M14 Thread.

Blister Pack contains flip down Foot, spring and 2 allen head screws.

Genuine Montolit replacement spare part for the Masterpiuma P3 tile cutters.

Replacement handle for Masterpiuma P3 cutters with a 7mm rail.

Replacement handle for Masterpiuma P3 cutters with a 12mm rail.

Genuine replacement rubber feet

Pack of 5

To Fit all Masterpiuma Tile Cutters

Imperial measurement guide stickers.

To fit the following cutters:

63P3, 75P3, 93P3, 125P3, 155P3

MOTO-Flashline MOTORIZED DRY cutting SYSTEM for SLABS AND Porcelain tiles, GRANITE, MARBLE.

Includes

Moto saw machine with carry case ONLY

Rails NOT included

STL125GG is made with MEDIUM GRANE diamonds and is suitable for working on hard stone materials such as porcelain tiles, granite, concrete.

STL115GG is made with MEDIUM GRANE diamonds and is suitable for working on hard stone materials such as porcelain tiles, granite, concrete.

STL 125GF is an innovative Multi-Purpose diamond cup designed for finishing tiles: beveling, small cuts, grinding, rounding and shaping edges and corner

STL 115GF is an innovative Multi-Purpose diamond cup designed for finishing tiles: beveling, small cuts, grinding, rounding and shaping edges and corner

Only 1.0mm Thick For Finer Cuts

Must be used with the Montolit Tutorcut

Only 1.0mm Thick For Finer Cuts

Must be used with the Montolit Tutorcut

Contents:

CS100 Diamond Blade

Tutorcut

Only 1.3mm Thick For Finer Cuts

To fit the Montolit Moto Saw

Montolit CBX 125mm DNA Diamond Blade CBX115

Diamond Blade for 5" Angle Grinder

Porcelain, Ceramic, Natural Stone & Marble

Main Feature: double layer sandwich diamond blade wet cut – the main cutting edge has medium diamond grit for a fast cutting action, whilst the side parts of the crown have fine diamond grit in order to achieve a high quality cut finishing.

250mm x 30/25.4mm

Main Feature: double layer sandwich diamond blade wet cut – the main cutting edge has medium diamond grit for a fast cutting action, whilst the side parts of the crown have fine diamond grit in order to achieve a high quality cut finishing.

300mm x 30/25.4mm

Main Feature: double layer sandwich diamond blade wet cut – the main cutting edge has medium diamond grit for a fast cutting action, whilst the side parts of the crown have fine diamond grit in order to achieve a high quality cut finishing.

350mm x 30/25.4mm

115mm Diamond Blade

1.4mm Thick

22.2mm Bore

Will fit all 115mm angle grinders

Special Offer just for Black Friday 

Includes:

1 x FS6 6mm Dry M14 Diamond Hole Cutter 

1 x TCS85 85mm Diamond Blade For Sockets

1 x M-Performer Cooling Fluid For Diamond Hole Cutters

Replacement Red Measurement Bar Extension

Montolit Mini Suction Cup

Cup Size 80mm

Max lifting weight 20kg

Mini Montolit is the perfect little tile cutter for kitchen, cloackrooms and bathrooms.

26A

36cm Maximum Cutting Length

25 x 25cm Maximum Diagonal Cutting Length

20mm Maximum Cutting Thickness

Weight 2.8kg 

Montolit Red Line professional turbo diamond blade.

Suitable for use on Porcelain Stoneware and Hard Ceramic tiles.

Reinforced centre

Dry cutting

115mm x 22.2mm

Only 1.4mm thick

BATTILE is a vibrating suction cup able to remove the air from the glued tiles right after installation, this procedure is crucial to ensure perfect adhesion of the tile to the floor/wall and to avoid future cracks on material.

Contents:

Battile Pro Machine

1 x Battery Pack

Charger

Carry Case 

Vibration plate

Large lifting capacity for large format tiles

Max lifting height 30cm

Micro adjustments for precision leveling

Comes as a pair of lifters.

For use on Porcelain Stoneware, Ceramic, Granite and Marble tiles.

Can be used wet or dry.

Smooth finish, no chipping.

Available in 60 grit (Roughing), 120 grit (Grinding) & 200 grit (Smooth Finishing)

For use on Porcelain Stoneware, Ceramic, Granite and Marble tiles.

Can be used wet or dry.

Smooth finish, no chipping.

Available in 60 grit (Roughing), 120 grit (Grinding) & 200 grit (Smooth Finishing)

For use on Porcelain Stoneware, Ceramic, Granite and Marble tiles.

Can be used wet or dry.

Smooth finish, no chipping.

Available in 60 grit (Roughing), 120 grit (Grinding) & 200 grit (Smooth Finishing)

Please note there are no diamond blades or hole cutters included with the bag.

Safe bag designed to hold diamond blades up to 250mm, diamond cup wheels up to 125mm and diamond hole cutters up to 120mm.

35 x 13 x 30cm