Mapei Ultraplan Renovation Screed 3240 Fibre Reinforced Self Levelling Compound 25kg

Your one stop tile tool shop
In Stock

25kg Bag

Coverage: approx. 6m2 at 3mm thickness per 25kg

Min Depth: 3mm

Max Depth: 40mm

Tile After: 4-6 Hours

Was £15.41 ex vat
£15.11 ex vat
£18.13 inc vat
Work out how much you need

Using the calculator below, you can work out how much material you will need to get the job done. Please either enter your required area m2 or the width and length.

or
x &
Estimated Total:

This is a rough guide calculation provided in good faith, actual usage may vary, please allow for wastage when placing your order. Pro Tiler Ltd can't be held responsible for any under ordering.

Description
Specification
Attachments

Ultraplan Renovation Screed 3240 is a fibre reinforced self-levelling compound, designed for use in the refurbishment of existing floors in both commercial and domestic applications, it can be hand or pump applied.

Used for interior levelling, smoothing and infilling differences in thickness from 3 to 40 mm on new or existing concrete, screeds, stone, terrazzo and ceramic tiles, old and new timber floors, floorboards, chipboard panels, plywood for use in dry locations as an underlayment for floor finishes such as tile, stone, vinyl, carpet, and wood flooring. Ultraplan Renovation Screed 3240 is suitable where good resistance to loads is required, also for castor wheel traffic and underfloor and under tile heating systems.

Apply in a single coat from 3 to 40 mm in thickness.

To minimise aeration a spiked roller may be used.

The self-levelling properties of Ultraplan Renovation Screed 3240 will provide a surface ready to accept all kinds of floorcoverings.

Fiber-reinforced self-leveling compound designed for the renovation/refurbishment of existing floor substrates.

For use in both commercial and domestic situations.

Can be used from 3-40mm on concrete, screed, stone, ceramic, timber (plywood, chipboard, T&G floorboards).

Suitable for use with underfloor heating and for encapsulating electric cable under tile heating systems.

Can be hand or pump applied.

COVERAGE: approx. 6m2 at 3mm thickness.

Consistency: fine powder

Colour: grey

Specific gravity (kg/m³): 1,300

Dry solid content (%): 100

EMICODE: EC1 Plus - very low emission

APPLICATION DATA (at +23°C and 50% R.H.)

Mixing ratio: 4.25-4.5 litres of water per 25 kg bag

Thickness per coat: 3 to 40 mm

Self-levelling: Yes

The specific gravity of mix (kg/m³): 2,100

pH of the mix: approx. 12

Application temperature range: from +5°C to +30°C

Open time: 20 minutes

Setting time: 30-90 minutes

Walkable: 4-6 hours

Waiting time before bonding: 1-3 days depending on the thickness