Raimondi BC45 Jolly Mitre Machine 433BCOH EU

Device to perform 45° mitre cut high-quality finishing (“jolly”) directly on the construction site (actual mitre angle: 47°).
It works leaning and sliding on the edge of the tile (or slab): this guarantees a fast and precise work execution and allows to work without any limit on length.
The anti-scratch plastic slides ensure optimal smoothness on the slab/tile.

Maximum slab/tile thickness: 16 mm with 115 mm blade; 20 mm with 125 mm blade.

The two handles are designed to easily allow the necessary pressure during the entire length of the mitre cut (entrance, slab side, exit) to guarantee both optimal results and maximum ergonomics.

Cutting depth adjustment: by adjusting the dedicated knobs, it is possible to determine the amount of material to be removed (farther or closer to the tile glaze). Once the adjustment is set, it stays for any tiles/slabs thicknesses.

Blade tilt adjustment: by acting onto a dedicated screw, the blade can be tilted to prevent its rear from chipping the edge of tiles/slabs.

Suitable with almost all angle grinders with power between 600-1100W.

Available for grinders with M14 arbor attachment (art. 433BCOH EU) 

It can be either used dry (with a dust extractor) or with water (with a kit for wet cut art.433PWW A)