Ultra Tile Fix ProFlex SPES Standard Set Flexible S1 Adhesive White 20kg

Your one stop tile tool shop
In Stock

Standard Set

Colour: White

20kg Bag

Extended open time

4.5kg Per m² at 3mm Bed Thickness

Was £12.06 ex vat
£11.52 ex vat
£13.82 inc vat
Work out how much you need

Using the calculator below, you can work out how much material you will need to get the job done. Please either enter your required area m2 or the width and length.

or
x &
Estimated Total:

This is a rough guide calculation provided in good faith, actual usage may vary, please allow for wastage when placing your order. Pro Tiler Ltd can't be held responsible for any under ordering.

Description
Features
Specification
Attachments

UltraTile ProFlex SPES is a single-part, standard-setting, flexible adhesive for wall and floor tiles. It is specially formulated with extended workability, enhanced adhesion and flexibility, making it ideal for areas where slight movement or vibration can occur. Classified as S1 in accordance with EN 12004 it has a high level of deformation for greater tolerance to movement.

UltraTileFix ProFlex SPES is a polymer-modified adhesive which provides enhanced performance and high bond strength including installations subject to moisture. It has extended set properties for contractors who prefer a longer pot life. It is able to take light foot traffic within 18 hours of installation depending upon temperature and substrate.

Areas of use:

✓ General wall installations

✓ General floor installations

✓ Interior Installations

✓ Exterior installations

✓ Wet rooms

✓ Domestic showers with tray

✓ Communal showers

✓ Swimming pools

✓ Electric matting underfloor heating

✓ Piped water underfloor heating

✓ Conservatories

 

Suitable Tiles:

✓ Ceramic

✓ Porcelain

✓ Glass

✓ Mosaics

✓ Marble

✓ Travertine

✓ Granite

✓ Limestone

✓ Terracotta

✓ Quarry

✓ Slate

× Resin Backed

✓ Quartz

✓ Brick Slips

 

Substrates:

✓ Concrete

✓ Sand/cement screed

✓ Plywood overlay (15mm min)

✓ Tile backer boards

✓ Cement faced fibre boards

✓ Anhydrite/calcium sulphate/gypsum based screeds

✓ Tile on Tile

✓ Firm and stable plaster

✓ Plasterboard

✓ Sand/cement render

✓ Concrete brick/block

✓ Hard vinyl tiles

✓ Flooring grade asphalt

S1 Flexibility for timber floors, swimming pools and underfloor heating systems

Colour: White

3-20mm Bed thickness

2 Hours Pot Life

20kg: 5.2 - 5.5L Mixing ratio

Application Temperature: 5°C - 25°C

Conforms to C2 TE S1

Lifetime Guarantee