Pro Tiler Tools
FREE UK Delivery On orders over £250net*
Need some help? Call us on 01604 859800
Finance Available On orders over £250*

Weber Weberset Trade S1 Rapid Set Flexible Adhesive Grey 20kg

by Weber

Brand Weber

Rapid Setting

Flexible

Cement Based Adhesive

Suitable For Floors & Walls

Interior & Exterior Use

Colour: Grey

Bag Size: 20kg

Coverage: Approximately 1.5kg Per m² For Every 1mm Of Bed Thickness

Product Code Price Quantity
52740008

£16.79 INC VAT

£13.99 EX VAT

Work out how much you need

Using the calculator below, you can work out how much material you will need to get the job done. Please either enter your required area m2 or the width and length.

This is a rough guide calculation provided in good faith, actual usage may vary, please allow for wastage when placing your order. Pro Tiler Tools Ltd can't be held responsible for any under ordering.

Description

Weberset Trade S1 is a rapid-setting, flexible, cement-based floor and wall tile adhesive, available in grey or white for interior and exterior use.

It is used to fix all ceramic floor and wall tiles, mosaic, quarry, terrazzo, terracotta, porcelain and natural stone in situations where some movement or vibration is likely.

Uses:
For fixing ceramic, porcelain and natural stone tiles:
- Walls and floors.
- Interior and exterior.
- Heated screeds.
- Overboarded wooden floors.
- Low porosity tiles or substrates.
- Tiling onto existing tiles.

Please Note: Not recommended for tiling onto single layer wooden floors, e.g. chipboard, tongued and grooved timber. Not recommended for tiles with resin backs.

Specification

Exceeds the requirements of BS EN 12004 for C2FT-S1.
Bed thickness: 3 – 6mm (may be exceeded in small areas only).
Coverage (approx.):
- 9 kg/m² (solid bed, 6mm thick).
- 4.5 kg/m² (solid bed, 3mm thick).
- 3.0 kg/m² (using a notched trowel with 6 x 6mm.
- Notches at 12 mm centres).
Open Time: 10 minutes.
Working Time (pot life): 30 minutes.
Set Time: 2 hours – light foot traffic, full load after 24 hours.
Temperature Resistance: –10°C to 100°C and frost resistant when set.
Water Addition:
- 5 litres per 20kg for use as a pourable adhesive.
- 4 litres per 20kg for normal floor tiling.
- 3.4 litres per 20kg for non-slip wall tiling.
Particle Size: Up to approx. 0.5mm.
Storage & Shelf Life: When stored unopened in a cool dry place at temperatures above 5°C, shelf life is 12 months from date of manufacture.